EON 510
The EON510 is a 10-inch, two-way, powered, portable speaker system. Capable of reproducing full bandwidth sound at high levels it offers the additional utility of a 3 channel built-in mixer. The EON510 is comprised of a 254 mm (10 in) Differential Drive® woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280 watt Class-D integrated power amplifier. The input section contains all cross-over functions, protection, and mixer functionality.
Specifications:
System Type: Self powered 10", two-way, bass-reflex design
Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)
Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in ‘Flat’ position)
Coverage Pattern: 100° H x 60° V nominal
Directivity Index (DI): 9 dB
Directivity Factor (Q): 8
Crossover Frequency: 1.8 kHz
System Power Rating: 280 W continuous, 560 W peak
LF Power amp: 220 W continuous at driver impedance
HF Power amp: 60 W continuous at driver impedance
Distortion: Less than 0.1% at rated power
Maximum SPL: 121 dB
Signal indicators: Limit: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Mic/Line: Red LED indicator
Input Gain (input 3): Mic position: -Infinity to +40 dB
Line position: -Infinity to +4 dB (+20 dBu Max signal input)
Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
HF +2.5 dB Shelving Filter @ 4 kHz
Low Cut Filter: Preset high pass @ 120 Hz
LF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive®
integrated woofer
with dual 1.5” voice coils.
HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driver
Input 3 connector: Balanced XLR / ¼ inch TRS combo jack with XLR loop through,
Input 1 & 2 connector: ¼ inch TRS jack
Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Limiting/Protection: Dynamic Limiter
Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
Handles: One on top with rubber grip
Suspension / Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension
points, 1 x M10 pull-back point
Grille: Powder coated perforated steel with acoustically transparent
black screen backing.
AC input: 120 – 240 V, 50/60 Hz
Dimensions (H x W x D): 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)
Net Weight: 7.7 kg (17 lb)
714.00 (SSP)